In the Linux kernel, the following vulnerability has been resolved: scsi: pm8001: Fix running_req for internal abort commands Disabling the remote phy for a SATA disk causes a hang: root@(none)$ more /sys/class/sas_phy/phy-0:0:8/target_port_protocols sata root@(none)$ echo 0 > sys/class/sas_phy/phy-0:0:8/enable root@(none)$ [ 67.855950] sas: ex 500e004aaaaaaa1f phy08 change count has changed [ 67.920585] sd 0:0:2:0: [sdc] Synchronizing SCSI cache [ 67.925780] sd 0:0:2:0: [sdc] Synchronize Cache(10) failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK [ 67.935094] sd 0:0:2:0: [sdc] Stopping disk [ 67.939305] sd 0:0:2:0: [sdc] Start/Stop Unit failed: Result: hostbyte=0x04 driverbyte=DRIVER_OK ... [ 123.998998] INFO: task kworker/u192:1:642 blocked for more than 30 seconds. [ 124.005960] Not tainted 6.0.0-rc1-205202-gf26f8f761e83 #218 [ 124.012049] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 124.019872] task:kworker/u192:1 state:D stack:0 pid: 642 ppid: 2 flags:0x00000008 [ 124.028223] Workqueue: 0000:04:00.0_event_q sas_port_event_worker [ 124.034319] Call trace: [ 124.036758] __switch_to+0x128/0x278 [ 124.040333] __schedule+0x434/0xa58 [ 124.043820] schedule+0x94/0x138 [ 124.047045] schedule_timeout+0x2fc/0x368 [ 124.051052] wait_for_completion+0xdc/0x200 [ 124.055234] __flush_workqueue+0x1a8/0x708 [ 124.059328] sas_porte_broadcast_rcvd+0xa8/0xc0 [ 124.063858] sas_port_event_worker+0x60/0x98 [ 124.068126] process_one_work+0x3f8/0x660 [ 124.072134] worker_thread+0x70/0x700 [ 124.075793] kthread+0x1a4/0x1b8 [ 124.079014] ret_from_fork+0x10/0x20 The issue is that the per-device running_req read in pm8001_dev_gone_notify() never goes to zero and we never make progress. This is caused by missing accounting for running_req for when an internal abort command completes. In commit 2cbbf489778e ("scsi: pm8001: Use libsas internal abort support") we started to send internal abort commands as a proper sas_task. In this when we deliver a sas_task to HW the per-device running_req is incremented in pm8001_queue_command(). However it is never decremented for internal abort commnds, so decrement in pm8001_mpi_task_abort_resp().
Severity
Not rated by the source.
Dates
Published
2025-12-30 13:15 UTC
Modified
2026-11-18 05:47 UTC
Affected packages and fixes
linux
Debian packages (deb) · Debian 12
Affected
introduced 0, fixed 6.0.3-1 (ecosystem)
Fixed versions
6.0.3-1
Fix
Fixed version 6.0.3-1
sudo apt-get update && sudo apt-get upgrade
This command upgrades the distribution's packages. Compare the fixed version with the version you have installed.
linux
Debian packages (deb) · Debian 13
Affected
introduced 0, fixed 6.0.3-1 (ecosystem)
Fixed versions
6.0.3-1
Fix
Fixed version 6.0.3-1
sudo apt-get update && sudo apt-get upgrade
This command upgrades the distribution's packages. Compare the fixed version with the version you have installed.
linux
Debian packages (deb) · Debian 14
Affected
introduced 0, fixed 6.0.3-1 (ecosystem)
Fixed versions
6.0.3-1
Fix
Fixed version 6.0.3-1
sudo apt-get update && sudo apt-get upgrade
This command upgrades the distribution's packages. Compare the fixed version with the version you have installed.
Fix commands are the export's own generic commands. Ojuju never runs them. Check them against your setup first.