Advisory

DEBIAN-CVE-2026-43371

Also known as: CVE-2026-43371

Summary

The record has no summary.

Details

In the Linux kernel, the following vulnerability has been resolved: net: macb: Shuffle the tx ring before enabling tx Quanyang observed that when using an NFS rootfs on an AMD ZynqMp board, the rootfs may take an extended time to recover after a suspend. Upon investigation, it was determined that the issue originates from a problem in the macb driver. According to the Zynq UltraScale TRM [1], when transmit is disabled, the transmit buffer queue pointer resets to point to the address specified by the transmit buffer queue base address register. In the current implementation, the code merely resets queue->tx_head and queue->tx_tail to '0'. This approach presents several issues: - Packets already queued in the tx ring are silently lost, leading to memory leaks since the associated skbs cannot be released. - Concurrent write access to queue->tx_head and queue->tx_tail may occur from macb_tx_poll() or macb_start_xmit() when these values are reset to '0'. - The transmission may become stuck on a packet that has already been sent out, with its 'TX_USED' bit set, but has not yet been processed. However, due to the manipulation of 'queue->tx_head' and 'queue->tx_tail', macb_tx_poll() incorrectly assumes there are no packets to handle because queue->tx_head == queue->tx_tail. This issue is only resolved when a new packet is placed at this position. This is the root cause of the prolonged recovery time observed for the NFS root filesystem. To resolve this issue, shuffle the tx ring and tx skb array so that the first unsent packet is positioned at the start of the tx ring. Additionally, ensure that updates to queue->tx_head and queue->tx_tail are properly protected with the appropriate lock. [1] https://docs.amd.com/v/u/en-US/ug1085-zynq-ultrascale-trm

Severity

Medium Basis: CVSS v3 score 5.5, vector CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H

Dates

Published
2026-05-08 15:16 UTC
Modified
2026-11-12 10:01 UTC

Affected packages and fixes

linux

Debian packages (deb) · Debian 14

Affected

  • introduced 0, fixed 6.19.10-1 (ecosystem)

Fixed versions

6.19.10-1

Fix

  • Fixed version 6.19.10-1
    sudo apt-get update && sudo apt-get upgrade

This command upgrades the distribution's packages. Compare the fixed version with the version you have installed.

Fix commands are the export's own generic commands. Ojuju never runs them. Check them against your setup first.

Check your own computer: guard packages check

View this record on OSV.dev

Source

Source: Debian Security Tracker (converted by OSV.dev)

Debian Security Tracker, converted to OSV by OSV.dev.

Sources & licences