Advisory

DEBIAN-CVE-2026-89927

Also known as: CVE-2026-89927

Summary

The record has no summary.

Details

In the Linux kernel, the following vulnerability has been resolved: KVM: x86: hyper-v: Clamp stimer deadline to avoid livelock Fix an issue where userspace or the guest can program an Hyper-V synthetic timer to have a deadline in the past via integer overflow, preventing the CPU from making progress and triggering an RCU stall. Hyper-V's SynIC exposes 4 per-vCPU synthetic timers to the guest, which are emulated by KVM. Each is programmed through the HV_X64_MSR_STIMERi_CONFIG and HV_X64_MSR_STIMERi_COUNT MSRs. Depending on CONFIG, COUNT represents either the absolute expiration time or the period of a periodic timer, both expressed in 100ns ticks. These timers may be set both by the guest (WRMSR) and the host (KVM_SET_MSRS). When the timer is enabled, stimer_start() translates COUNT to an absolute monotonic deadline and arms an hrtimer. If COUNT is set to a value close to U64_MAX, the deadline calculation can overflow. ktime_add_ns(ktime_now, 100 * (stimer->exp_time - time_now)) This can result in a CPU livelock. stimer_start() arms the timer via hrtimer_start() with a deadline in the past, which causes it to immediately fire. The stimer callback then raises KVM_RQ_HV_STIMER, with the intention of causing KVM to deliver a synthetic interrupt on the next vCPU guest enter. Then, once userspace issues KVM_RUN, vcpu_enter_guest() consumes the request, calling kvm_hv_process_stimers(). This would normally disable the timer via stimer_expiration() once the deadline is in the past. However, the deadline comparison is done between the KVM reference counter and stime->exp_time, which is a big value close to U64_MAX, so this never happens for a few thousand years. kvm_hv_process_timers() then re-arms the timer via stimer_start(), since it was not disabled, which again fires immediately. Before entering the guest, kvm_vcpu_exit_request() checks kvm_request_pending(), which returns true due to the newly raised KVM_REQ_HV_STIMER. Then vcpu_enter_guest() aborts the guest entry, returning early into vcpu_run(), which loops back again into vcpu_enter_guest(), restarting the cycle. Since there are no manual yields in this loop, a task with SCHED_FIFO may starve RCU grace-period kthreads, which exposes the stalls found by syzcaller: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: (detected by 1, t=10502 jiffies, g=14269, q=1142 ncpus=2) rcu: All QSes seen, last rcu_preempt kthread activity 10500 (4294965239-4294954739), jiffies_till_next_fqs=1, root ->qsmask 0x0 rcu: rcu_preempt kthread starved for 10500 jiffies! g14269 f0x2 RCU_GP_WAIT_FQS(5) ->state=0x0 ->cpu=0 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. ( ... ) Call Trace: <IRQ> __run_hrtimer kernel/time/hrtimer.c:1773 [inline] __hrtimer_run_queues+0x408/0xc30 kernel/time/hrtimer.c:1841 hrtimer_interrupt+0x45b/0xaa0 kernel/time/hrtimer.c:1903 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1045 [inline] __sysvec_apic_timer_interrupt+0x102/0x3e0 arch/x86/kernel/apic/apic.c:1062 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1056 [inline] sysvec_apic_timer_interrupt+0xa1/0xc0 arch/x86/kernel/apic/apic.c:1056 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:697 RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:152 [inline] RIP: 0010:_raw_spin_unlock_irqrestore+0xa8/0x110 kernel/locking/spinlock.c:194 Code: 74 05 e8 0b f4 5f f6 48 c7 44 24 20 00 00 00 00 9c 8f 44 24 20 f6 44 24 21 02 75 4f f7 c3 00 02 00 00 74 01 fb bf 01 00 00 00 <e8> 23 6b 27 f6 65 8b 05 7c 60 5a 07 85 c0 74 40 48 c7 04 24 0e 36 RSP: 0018:ffffc900040a7320 EFLAGS: 00000206 RAX: 5de15cb931505900 RBX: 0000000000000a06 RCX: 5de15cb931505900 RDX: 0000000000000007 RSI: ffffffff8daa9dc3 RDI: 0000000000000001 RBP: ffffc900040a73b0 R08: ffffffff8fc3d0 ---truncated---

Severity

High Basis: CVSS v3 score 7.1, vector CVSS:3.1/AV:L/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:H

Dates

Published
2026-09-16 11:17 UTC
Modified
2026-10-23 17:47 UTC

Affected packages and fixes

linux

Debian packages (deb) · Debian 12

Affected

  • introduced 0, fixed 6.1.190-1 (ecosystem)

Fixed versions

6.1.190-1

Fix

  • Fixed version 6.1.190-1
    sudo apt-get update && sudo apt-get upgrade

This command upgrades the distribution's packages. Compare the fixed version with the version you have installed.

linux

Debian packages (deb) · Debian 13

Affected

  • introduced 0, fixed 6.12.111-1 (ecosystem)

Fixed versions

6.12.111-1

Fix

  • Fixed version 6.12.111-1
    sudo apt-get update && sudo apt-get upgrade

This command upgrades the distribution's packages. Compare the fixed version with the version you have installed.

linux

Debian packages (deb) · Debian 14

Affected

  • introduced 0, fixed 7.2.6-1 (ecosystem)

Fixed versions

7.2.6-1

Fix

  • Fixed version 7.2.6-1
    sudo apt-get update && sudo apt-get upgrade

This command upgrades the distribution's packages. Compare the fixed version with the version you have installed.

linux-6.12

Debian packages (deb) · Debian 12

Affected

  • introduced 0, fixed 6.12.111-1~deb12u1 (ecosystem)

Fixed versions

6.12.111-1~deb12u1

Fix

  • Fixed version 6.12.111-1~deb12u1
    sudo apt-get update && sudo apt-get upgrade

This command upgrades the distribution's packages. Compare the fixed version with the version you have installed.

Fix commands are the export's own generic commands. Ojuju never runs them. Check them against your setup first.

Check your own computer: guard packages check

View this record on OSV.dev

Source

Source: Debian Security Tracker (converted by OSV.dev)

Debian Security Tracker, converted to OSV by OSV.dev.

Sources & licences