Advisory

GHSA-8g5g-8vmr-9782

Also known as: BIT-pillow-2026-112403, CVE-2026-112403, PYSEC-2026-4332

Summary

Pillow: Heap buffer overflow in ImagingJpegDecode

Details

Summary

JpegImageFile.draft() — which Image.thumbnail() calls automatically — requests 1/2, 1/4 or 1/8 scaled JPEG output and shrinks self._size and the tile extents to match, so _setimage() allocates a single-row decode buffer of ceil(W/s) samples. ImagingJpegDecode() sets cinfo.scale_num/scale_denom, calls jpeg_start_decompress(), and then reads scanlines into that buffer without ever comparing cinfo.output_width, cinfo.output_height or cinfo.out_color_components against state->xsize, state->ysize and state->bits.

libjpeg-turbo 3.x decodes lossless (SOF3) JPEG, but hardwires lossless streams to no scaling — the requested scale_denom is silently discarded. It therefore returns full-width W-sample rows into a buffer sized for ceil(W/s). Each jpeg_read_scanlines() call writes (W - ceil(W/s)) x components bytes past the end of the heap allocation, and the overflowing bytes are the decoded pixel values, which are byte-exact for an 8-bit grayscale lossless image.

The input is a standards-compliant JPEG, so Image.open(..., formats=["JPEG"]) does not prevent it. Pillow's Python SOF parser already accepts marker 0xFFC3 ("SOF3", "Spatial lossless") at 8-bit precision, so the file opens normally as a JPEG / mode L image at its full declared size.

Affected code

At e41083f383c9cd3db95de52564cc0b6452313d4a (main, 2026-08-29):

  • src/libImaging/JpegDecode.c:224-262 — ImagingJpegDecode(); jpeg_start_decompress() at :240, jpeg_read_scanlines() at :252, with no geometry check between them.
  • src/decode.c:222-231 — _setimage(); state->buffer = calloc(1, state->bytes) with state->bytes = (state->bits * state->xsize + 7) / 8.
  • src/PIL/JpegImagePlugin.py:428-464 — JpegImageFile.draft(); computes s and shrinks _size, the tile extents and decoderconfig with no notion of lossless coding.
  • src/PIL/JpegImagePlugin.py:271 — 0xFFC3: ("SOF3", "Spatial lossless", SOF).
// src/libImaging/JpegDecode.c
            if (context->scale > 1) {
                context->cinfo.scale_num = 1;
                context->cinfo.scale_denom = context->scale;
            }
            ...
        case 2:
            if (!jpeg_start_decompress(&context->cinfo)) {
                break;
            }
            state->state++;
            /* fall through */
        case 3:
            ok = 1;
            while (state->y < state->ysize) {
                ok = jpeg_read_scanlines(&context->cinfo, &state->buffer, 1);

Because state->ysize (ceil(H/s)) can never equal libjpeg's output_height when s >= 2, the decode always ends in an error after the rows have already been written: the caller sees an exception and gets no pixels back. The OSError is a consequence of the overflow, not the issue being reported.

Primitive

Per scanline: a contiguous write of (W - ceil(W/s)) x c bytes immediately past a calloc(ceil(W/s) x c) block, where c = 1 for mode L and 4 for RGB (RGBX) and CMYK; repeated for ceil(H/s) rows over the same region. The buffer size class is chosen by the attacker through W, and for grayscale the overflowing content is an arbitrary attacker-chosen byte string.

Measured in the reproducer below: 1200x1100 mode L, s=2 — a 600-byte allocation, 600 bytes written past it, ASan reporting the whole 1200-byte row write as one memcpy.

Threshold: draft() must select s >= 2, i.e. W // requested_w >= 2 and H // requested_h >= 2. For thumbnail((256,256)) with the default reducing_gap=2.0 that means W, H >= 1024.

Reproduction

Self-contained Docker reproducer (Ubuntu 24.04, clang 20, libjpeg-turbo 3.1.4 and Pillow both built from source with -fsanitize=address; Pillow checked out at ${TARGET_COMMIT}, default e41083f383c9cd3db95de52564cc0b6452313d4a). Save the three files below as Dockerfile, make_sof3.py and trigger.py in an empty directory, then:

docker build -t pillow-sof3-oob . && docker run --rm pillow-sof3-oob

make_sof3.py is a self-contained encoder that emits a standards-compliant 8-bit grayscale lossless-Huffman JPEG (SOI / DHT / SOF3 P=8, Y=1100, X=1200, Nf=1 / SOS Ss=1 predictor 1, Se=0, Ah=Al=0 / entropy-coded row differences / EOI), whose rows carry a repeating marker pattern. trigger.py opens it and calls thumbnail(), whose implicit draft() picks s=2 and allocates a 600-byte row buffer.

Dockerfile

FROM ubuntu:24.04
ENV DEBIAN_FRONTEND=noninteractive
ARG TARGET_COMMIT=e41083f383c9cd3db95de52564cc0b6452313d4a
ARG CLANG_VERSION=20
ARG LIBJPEG_TURBO_TAG=3.1.4

RUN apt-get update && apt-get install -y --no-install-recommends \
        ca-certificates git make cmake nasm pkg-config libc6-dev gcc \
        wget gnupg lsb-release software-properties-common \
        python3 python3-dev python3-pip python3-venv zlib1g-dev \
    && wget -qO /tmp/llvm.sh https://apt.llvm.org/llvm.sh && chmod +x /tmp/llvm.sh && /tmp/llvm.sh ${CLANG_VERSION} \
    && apt-get install -y --no-install-recommends clang-${CLANG_VERSION} llvm-${CLANG_VERSION} libclang-rt-${CLANG_VERSION}-dev \
    && rm -rf /var/lib/apt/lists/*

ENV CC=clang-20
ENV CXX=clang++-20
ENV CFLAGS="-g -fno-omit-frame-pointer -O1 -fsanitize=address"
ENV CXXFLAGS="-g -fno-omit-frame-pointer -O1 -fsanitize=address"
ENV LDFLAGS="-fsanitize=address"

# --- libjpeg-turbo 3.x (lossless SOF3 support) built with ASan ---
RUN git clone https://github.com/libjpeg-turbo/libjpeg-turbo /src/libjpeg-turbo
RUN cd /src/libjpeg-turbo && git checkout ${LIBJPEG_TURBO_TAG} \
    && cmake -B /build/ljt -S . -DCMAKE_BUILD_TYPE=None \
        -DCMAKE_C_COMPILER=clang-20 \
        -DCMAKE_C_FLAGS="$CFLAGS" \
        -DCMAKE_EXE_LINKER_FLAGS="$LDFLAGS" \
        -DCMAKE_SHARED_LINKER_FLAGS="$LDFLAGS" \
        -DCMAKE_INSTALL_PREFIX=/opt/ljt -DWITH_JPEG8=0 -DENABLE_STATIC=0 \
    && cmake --build /build/ljt -j"$(nproc)" && cmake --install /build/ljt

# --- Pillow at the pinned commit, built with ASan against that libjpeg ---
RUN git clone https://github.com/python-pillow/Pillow /src/repo
WORKDIR /src/repo
RUN git checkout ${TARGET_COMMIT}

ENV JPEG_ROOT=/opt/ljt
ENV LD_LIBRARY_PATH=/opt/ljt/lib
RUN python3 -m venv /venv \
    && /venv/bin/pip install --quiet --upgrade pip "setuptools>=80" wheel pybind11 \
    && CFLAGS="$CFLAGS" LDFLAGS="$LDFLAGS -Wl,-rpath,/opt/ljt/lib" \
       /venv/bin/pip install --no-build-isolation --no-deps . \
    && ln -sf "$(clang-20 -print-file-name=libclang_rt.asan-x86_64.so)" /opt/libasan.so \
    && LD_PRELOAD=/opt/libasan.so ASAN_OPTIONS=detect_leaks=0 \
       /venv/bin/python3 -c "from PIL import Image, features; print(Image.__version__, features.version('jpg'))"

COPY make_sof3.py /tmp/make_sof3.py
COPY trigger.py /tmp/trigger.py
RUN python3 /tmp/make_sof3.py /tmp/sof3_gray_1200x1100.jpg

ENV ASAN_OPTIONS=detect_leaks=0:abort_on_error=1:symbolize=1
ENV ASAN_SYMBOLIZER_PATH=/usr/lib/llvm-20/bin/llvm-symbolizer
ENV LD_PRELOAD=/opt/libasan.so
CMD ["/bin/sh","-c","cd /tmp && /venv/bin/python3 /tmp/trigger.py 2>&1; echo EXIT=$?"]

Severity

Critical Basis: The source's own band: CRITICAL

Dates

Published
2026-10-20 20:40 UTC
Modified
2026-10-28 11:10 UTC

Affected packages and fixes

pillow

PyPI · All systems

Affected

  • introduced 0, fixed 13.0.0 (ecosystem)

Fixed versions

13.0.0

Fix

  • Fixed version 13.0.0
    pip install --upgrade pillow==13.0.0

Fix commands are the export's own generic commands. Ojuju never runs them. Check them against your setup first.

Check your own computer: guard packages check

View this record on OSV.dev

Source

Source: GitHub Advisory Database (reviewed advisories) · CC BY 4.0

Sources & licences