Advisory

GHSA-ff84-5f28-78qj

Also known as: CVE-2026-67550

Summary

re2: Out-of-bounds heap read in exec/test/match via attacker-influenced lastIndex on a non-ASCII subject → uncatchable process crash (DoS)

Details

Summary

re2 validates the user-settable lastIndex against the subject's UTF-8 byte length but then uses it as a UTF-16 code-unit count to walk the subject buffer, with no bounds check. For any non-ASCII subject, the byte length is larger than the true character count, so a lastIndex between those two values passes validation while pointing past the end of the buffer. The subsequent walk reads out of bounds. With a large subject the read marches into unmapped memory and the process dies with SIGABRT/SIGSEGV — an uncatchable crash (try/catch cannot stop it), i.e. a denial of service for any worker/process that runs the match. In some cases the out-of-bounds bytes are copied into the returned value (a bounded, best-effort heap information leak).

Root cause

The subject wrapper stores the UTF-8 byte length in StrVal::length:

  • lib/addon.cc:200 auto argLength = utf8Length(s, isolate); — UTF-8 byte count
  • lib/addon.cc:209 lastStringValue.reset(buffer, argSize, argLength, startFrom, false, isAscii);

setIndex then validates the (UTF-16) lastIndex against that byte length and walks the buffer by character count:

// lib/addon.cc:229
void StrVal::setIndex(size_t newIndex) {
    isValidIndex = newIndex <= length;   // length == UTF-8 BYTE length, not UTF-16 length
    if (!isValidIndex) { index = newIndex; byteIndex = 0; return; }
    ...
    // addon.cc:263
    byteIndex = index < newIndex
        ? getUtf16PositionByCounter(data, byteIndex, newIndex - index)
        : getUtf16PositionByCounter(data, 0, newIndex);
    index = newIndex;
}

getUtf16PositionByCounter reads data[from] and advances by the UTF-8 char size with no check of `from` against the buffer size:

// lib/wrapped_re2.h:264
inline size_t getUtf16PositionByCounter(const char *data, size_t from, size_t n) {
    for (; n > 0; --n) {
        size_t s = getUtf8CharSize(data[from]);   // <-- OOB read once `from` passes the buffer end
        from += s;
        if (s == 4 && n >= 2) --n;
    }
    return from;
}

lastIndex is user-settable to any positive integer (capped only at >= 0, no upper bound):

// lib/accessors.cc:166
NAN_SETTER(WrappedRE2::SetLastIndex) {
    ...
    int n = value->NumberValue(...).FromMaybe(0);
    re2->lastIndex = n <= 0 ? 0 : n;   // no upper bound relative to the subject
}

For an ASCII subject the byte length equals the UTF-16 length, so the guard is correct — this only triggers on non-ASCII subjects. The out-of-bounds read happens inside prepareArgument for any global/sticky regex, reached by exec, test, String.prototype.match, replace, and split.

Proof of concept

Minimal (AddressSanitizer, deterministic OOB read):

const RE2 = require('re2');
const re = new RE2('a', 'y');   // sticky; 'g' also works
re.lastIndex = 3;               // 3 <= byteLen(4) passes the guard; only 2 real chars exist
re.exec('éé');                  // U+00E9 = 2 bytes each

Built with -fsanitize=address, this aborts with:

ERROR: AddressSanitizer: heap-buffer-overflow ... READ of size 1
  #0 getUtf16PositionByCounter   wrapped_re2.h:268
  #1 StrVal::reset               addon.cc:277
  #2 WrappedRE2::prepareArgument addon.cc:209
  #3 WrappedRE2::Exec            exec.cc:17

The overflowed region is the subject buffer allocated by node::Buffer::New at addon.cc:205.

Real-world impact on the shipped prebuilt binary (no ASAN) — uncatchable crash:

const RE2 = require('re2');
const s = '中'.repeat(40000000);        // UTF-16 length 40M, UTF-8 bytes 120M
const re = new RE2('a', 'y');
re.lastIndex = Buffer.byteLength(s) - 1; // passes the byte-length guard, far exceeds real char count
re.exec(s);                              // walks into unmapped memory -> SIGSEGV (exit 139)

try { ... } catch (e) {} around the call does not prevent termination — it is a native fault, not a JS exception. Validated on a clean npm install [email protected] (latest): stock prebuilt → SIGSEGV; ASAN build → the heap-buffer-overflow read above.

Impact

  • Denial of service (primary): an uncatchable native crash that terminates the Node process/worker. Reachable remotely and without authentication wherever an application (a) uses a global or sticky RE2, (b) applies it to a non-ASCII subject, and (c) sets lastIndex from attacker-influenced data (e.g. resuming a scan/pagination at a client-supplied offset).
  • Information disclosure (secondary, best-effort): the out-of-bounds byteIndex can cause adjacent heap bytes to be copied into the returned value (e.g. the leading segment of a replace result). This is bounded and unreliable — the subject buffer is calloc-allocated (zero-filled) and the over-read distance depends on interpreting out-of-bounds bytes as UTF-8 sizes — so it is noted for completeness, not as a dependable primitive.

This is distinct from GHSA-8hcv-x26h-mcgp (the global replace() output-amplification abort), which was fixed in 1.25.1. This lastIndex out-of-bounds read is a separate defect and remains present in 1.25.1.

Suggested fix

Two independent hardenings; either closes the crash, both is safest:

  1. Bound the walk so it can never read past the buffer:
inline size_t getUtf16PositionByCounter(const char *data, size_t size, size_t from, size_t n) {
    for (; n > 0 && from < size; --n) {
        size_t s = getUtf8CharSize(data[from]);
        from += s;
        if (s == 4 && n >= 2) --n;
    }
    return from > size ? size : from;
}

(thread size through the two call sites in StrVal::setIndex).

  1. Validate `lastIndex` against the true UTF-16 length, not the UTF-8 byte length — e.g. store s->Length() (UTF-16 units) as the value compared in isValidIndex = newIndex <= <utf16Length>, so an out-of-range lastIndex takes the existing !isValidIndex early-return path.

Resolution

Fixed in re2 1.25.2.

lastIndex is now validated against the subject's UTF-16 length instead of its
UTF-8 byte length (lib/addon.cc), so an out-of-range lastIndex is rejected
before the buffer is walked. As defense in depth, the code-unit walk
(getUtf16PositionByCounter in lib/wrapped_re2.h) is now bounded by the
buffer size and can no longer read past the end.

Remediation: upgrade to [email protected] or later.

Workaround (if you cannot upgrade): do not assign lastIndex from untrusted
input, or clamp it to the subject's string length (str.length) before calling
exec/test/match/replace/split on a non-ASCII subject.

Severity

Medium Basis: The source's own band: MODERATE

Dates

Published
2026-07-31 16:53 UTC
Modified
2026-07-31 17:00 UTC

Affected packages and fixes

re2

npm · All systems

Affected

  • introduced 0, fixed 1.25.2 (semver)

Fixed versions

1.25.2

Fix

Fix commands are the export's own generic commands. Ojuju never runs them. Check them against your setup first.

Check your own computer: guard packages check

View this record on OSV.dev

Source

Source: GitHub Advisory Database (reviewed advisories) · CC BY 4.0

Sources & licences