Advisory

GHSA-w26r-fwg8-rcp3

Also known as: CVE-2026-63641

Summary

MagicMirror Socket.IO module namespaces bypass configured IP whitelist and allow unauthenticated server-side actions

Details

Summary
MagicMirror applies ipWhitelist only as Express middleware, but the Socket.IO server is attached directly to the HTTP server without equivalent IP allowlist, origin, or namespace authentication checks. In a documented common deployment where MagicMirror listens on a non-loopback interface but expects ipWhitelist to restrict access, an untrusted network client can connect directly to module Socket.IO namespaces and send arbitrary module-helper notifications. This allows unauthenticated server-side requests through default modules and can reach command execution in the default updatenotification helper when a third-party module update is pending and the attacker supplies the update command through the trusted socket configuration path.

Details
The affected product is the npm package/application magicmirror at version 2.36.0, tested at commit fb41d24ef522e91e802e2a623ff6afbddeb3c9d8 from https://github.com/MagicMirrorOrg/MagicMirror.git.

Default committed settings bind to loopback and allow loopback only (js/defaults.js:8-13), so the remote network impact requires a documented common configuration where the server is reachable beyond loopback. The shipped sample explicitly documents non-loopback binding and IP allowlist behavior: config/config.js.sample:11-20 says address may be another interface or 0.0.0.0/::, and ipWhitelist controls allowed clients.

The trust-boundary issue is that Socket.IO is configured before and outside the Express middleware chain:

  • js/server.js:42-50 creates Socket.IO directly on the HTTP(S) server with cors.origin: /.*$/.
  • js/server.js:89-90 applies ipAccessControl(config.ipWhitelist) only with app.use(...), which protects Express routes and static files but not Socket.IO handshakes or namespaces.
  • A search of runtime files found no allowRequest, io.use(...), handshake IP check, or namespace authentication for Socket.IO; the only relevant matches were js/server.js:44 and js/server.js:90.
  • js/node_helper.js:88-103 registers every module namespace and dispatches every socket event and payload directly to socketNotificationReceived(...).

Once a client can reach the Socket.IO server, the following default-module server-side actions are reachable without an equivalent IP whitelist or module-authentication check:

  • defaultmodules/newsfeed/node_helper.js:12-17 accepts CHECK_ARTICLE_URL and calls checkArticleUrl(payload.url).
  • defaultmodules/newsfeed/node_helper.js:25-38 performs fetch(url, { method: "HEAD" }) on the supplied URL and sends the result back.
  • defaultmodules/calendar/node_helper.js:13-24 accepts ADD_CALENDAR/FETCH_CALENDAR socket messages.
  • defaultmodules/calendar/node_helper.js:40-58 accepts an arbitrary syntactically valid calendar URL and creates a fetcher.
  • defaultmodules/calendar/calendarfetcher.js:35-44 passes the URL into HTTPFetcher, whose fetch sink is js/http_fetcher.js:286-294.
  • defaultmodules/updatenotification/node_helper.js:46-68 accepts CONFIG, MODULES, and SCAN_UPDATES notifications and trusts the socket-provided config/module list.
  • defaultmodules/updatenotification/update_helper.js:43-47 stores update commands from config.
  • defaultmodules/updatenotification/update_helper.js:96-116 executes the selected update command with child_process.exec in the module directory.
  • defaultmodules/updatenotification/update_helper.js:221-227 looks up the command from config.updates by module name.

False-positive screening performed:

  • Express HTTP routes are protected by ipAccessControl(config.ipWhitelist) at js/server.js:89-90; this does not protect Socket.IO because Socket.IO is attached to the raw HTTP server and no Socket.IO middleware was found.
  • The explicit /cors HTTP endpoint has separate SSRF mitigations (js/server_functions.js:47-117) and is disabled by default (js/defaults.js:14); the confirmed request primitive here uses module-helper socket paths, not /cors.
  • The command-execution variant is not an unconditional default RCE: updatenotification only executes an update command for a non-core git-managed module that is considered behind. However, the trusted command source is attacker-controlled through the unauthenticated socket CONFIG message once this boundary is crossed.
  • Default loopback-only binding lowers default remote exposure, but the sample configuration documents exactly the deployment model where users rely on ipWhitelist for network restrictions.

Affected-version evidence: only [email protected] at commit fb41d24ef522e91e802e2a623ff6afbddeb3c9d8 was tested. The affected range is unknown from this audit; earlier versions were not tested. No patched version or fix commit was identified locally.

PoC
The following safe local PoCs were run from a clean checkout of MagicMirror at commit fb41d24ef522e91e802e2a623ff6afbddeb3c9d8. Because node_modules were not installed in this audit environment and package.json:52 has a destructive postinstall (git clean -df fonts vendor modules/default), the commands use small Node harnesses with stubs for missing dependencies while exercising the vulnerable repository code paths directly. They do not contact external hosts and write only disposable /tmp marker files.

  1. Confirm that the runtime lacks Socket.IO IP allowlist controls:
grep -RIn --exclude-dir=node_modules --exclude-dir=.git --exclude-dir=.claude --exclude-dir=reports -E "allowRequest|io\.use\(|handshake|ipAccessControl\(|cors: \{|origin: /\.\*\$/" js defaultmodules serveronly config tests

Observed output:

js/server.js:44:				cors: {
js/server.js:90:			app.use(ipAccessControl(config.ipWhitelist));

This confirms the IP allowlist appears only as Express middleware and no Socket.IO handshake/namespace allowlist was present in the reviewed runtime files.

  1. Confirm a default module helper will perform a server-side request to an attacker-supplied loopback URL when driven through its socket notification handler:
node -e 'const Module=require("module"); const orig=Module._load; Module._load=(r,p,m)=>{ if(r==="logger") return {log(){},error(){},warn(){},info(){},debug(){}}; if(r==="node_helper") return {create:(o)=>function(){Object.assign(this,o);this.sendSocketNotification=(n,p)=>console.log("SOCKET",n,JSON.stringify(p));}}; if(r==="./newsfeedfetcher") return function(){}; return orig(r,p,m); }; const calls=[]; global.fetch=async(url,opts)=>{calls.push({url,opts}); return {headers:{get:(h)=>h==="x-frame-options"?"deny":null}};}; const Helper=require("./defaultmodules/newsfeed/node_helper"); const h=new Helper(); h.start(); h.socketNotificationReceived("CHECK_ARTICLE_URL",{url:"http://127.0.0.1:65535/internal"}); setTimeout(()=>console.log("fetchCalls=",JSON.stringify(calls)),10);'

Observed output:

SOCKET ARTICLE_URL_STATUS {"url":"http://127.0.0.1:65535/internal","canFrame":false}
fetchCalls= [{"url":"http://127.0.0.1:65535/internal","opts":{"method":"HEAD"}}]

Severity

Low Basis: The source's own band: LOW

Dates

Published
2026-08-18 17:26 UTC
Modified
2026-08-18 17:41 UTC

Affected packages and fixes

magicmirror

npm · All systems

Affected

  • introduced 0, fixed 2.37.0 (semver)

Fixed versions

2.37.0

Fix

Fix commands are the export's own generic commands. Ojuju never runs them. Check them against your setup first.

Check your own computer: guard packages check

View this record on OSV.dev

Source

Source: GitHub Advisory Database (reviewed advisories) · CC BY 4.0

Sources & licences