github.com/free5gc/ausf
Affected
- introduced
0, last affected1.4.4(semver)
Fixed versions
None listed
Fix
No fixed version is listed.
Advisory
Also known as: CVE-2026-55784, GO-2026-6326
free5GC AUSF authentication contexts can be overwritten by concurrent requests for the same SUPI
Summary
The AUSF component of free5GC stores per-subscriber authentication state in a global sync.Map keyed only by SUPI. Every incoming authentication request creates a new AusfUeContext and stores it under that SUPI key without checking whether an authentication procedure is already in progress and without generating a per-session unique identifier.
An attacker with access to the AUSF SBI/N12 interface can send concurrent POST /nausf-auth/v1/ue-authentications requests for the same target SUPI. Each request is accepted and overwrites the previous authentication context. A valid EAP-AKA' response for an earlier challenge is then verified against the latest overwritten context, whose K_aut, XRES, and EapID no longer match the challenge. The result is a targeted authentication denial of service for that SUPI while the request flood is maintained.
This issue was confirmed on github.com/free5gc/ausf v1.4.4 and current main as of June 2026.
Details
The vulnerable context pool is defined in internal/context/context.go.
UePool is a sync.Map, which makes individual map operations safe, but it does not make the authentication procedure state safe. The problem is the session design: the key is only the SUPI, and Store() unconditionally replaces any active context for that SUPI.
type AUSFContext struct {
suciSupiMap sync.Map
UePool sync.Map
// ...
}
type AusfUeContext struct {
Supi string
// ...
// for EAP-AKA'
K_aut string
XRES string
Rand string
EapID uint8
Resynced bool
}
func NewAusfUeContext(identifier string) (ausfUeContext *AusfUeContext) {
ausfUeContext = new(AusfUeContext)
ausfUeContext.Supi = identifier
return ausfUeContext
}
func AddAusfUeContextToPool(ausfUeContext *AusfUeContext) {
ausfContext.UePool.Store(ausfUeContext.Supi, ausfUeContext)
}
The vulnerable sequence is executed for every authentication request in internal/sbi/processor/ue_authentication.go:
ueid := authInfoResult.Supi
ausfUeContext := ausf_context.NewAusfUeContext(ueid)
ausfUeContext.ServingNetworkName = snName
ausfUeContext.AuthStatus = models.AusfUeAuthenticationAuthResult_ONGOING
ausfUeContext.UdmUeauUrl = udmUrl
ausf_context.AddAusfUeContextToPool(ausfUeContext)
There is no guard such as LoadOrStore, no AUTHENTICATION_IN_PROGRESS response, no rate limit per SUPI, and no unique authentication-session ID in the context URL. For EAP-AKA', the returned context URL is derived directly from the SUCI/SUPI path:
/nausf-auth/v1/ue-authentications/{suci}/eap-session
All concurrent authentication attempts for the same subscriber therefore point to the same logical context URL, while the backing AusfUeContext in UePool is repeatedly replaced.
When the EAP response is later processed, the AUSF looks up the current context by SUPI:
currentSupi := ausf_context.GetSupiFromSuciSupiMap(eapSessionID)
ausfCurrentContext := ausf_context.GetAusfUeContext(currentSupi)
The EAP-AKA' response is then verified against the current context's K_aut and XRES:
K_autStr := ausfCurrentContext.K_aut
XMAC := CalculateAtMAC(K_aut, decodeEapAkaPrimePkt.MACInput)
MAC := decodeEapAkaPrimePkt.Attributes[ausf_context.AT_MAC_ATTRIBUTE].Value
XRES := ausfCurrentContext.XRES
RES := hex.EncodeToString(decodeEapAkaPrimePkt.Attributes[ausf_context.AT_RES_ATTRIBUTE].Value)
if !bytes.Equal(MAC, XMAC) {
eapOK = false
eapErrStr = "EAP-AKA' integrity check fail"
} else if XRES == RES {
logger.AuthELog.Infoln("Correct RES value, EAP-AKA' auth succeed")
// ...
}
If another request has overwritten the context between challenge issuance and response processing, the legitimate response is checked against the wrong K_aut and fails the AT_MAC verification.
Attack flow
The attack is selective for a target SUPI:
ctx_LEGIT under UePool[target_supi].ctx_LEGIT is overwritten by ctx_ATTACK.K_aut_LEGIT, reaches /eap-session.ctx_ATTACK by SUPI and computes XMAC with K_aut_ATTACK.When later contexts carry different session material, a continuous flood prevents the target subscriber from completing authentication because the AUSF's stored context keeps changing before the response is processed.
PoC and evidence
The issue was reproduced in two phases in a controlled free5GC lab.
Phase 1: context overwrite
Experiment:
POST /nausf-auth/v1/ue-authentications requests.suci-0-001-01-0-0-0-0000000002.0.0.0.0:8100; PoC connected to 127.0.0.1:8100.Observed result:
[131, 11, 157, 99, 182, 232, 127, 228, 119, 36, 104, 10,
107, 61, 66, 26, 110, 9, 210, 202, 53, 224, 237, 86]
/nausf-auth/v1/ue-authentications/suci-0-001-01-0-0-0-0000000002/eap-session
Add SuciSupiPair (suci-0-001-01-0-0-0-0000000002, imsi-001010000000002) to map.
Use EAP-AKA' auth method
| 201 | POST | /nausf-auth/v1/ue-authentications
...
This confirms that concurrent authentication requests for the same SUPI are accepted independently but collapse onto one shared context key.
Phase 2: valid EAP response fails after overwrite
The second PoC used a mock UDM with h2c support that returns different EAP-AKA' vectors by request counter for the same SUCI. This makes the overwrite directly observable:
| Request | Vector class | XRES | Effect |
|---|---|---|---|
| 1st | LEGIT | 0102030405060708 | response client computes AT_MAC with K_aut_LEGIT |
| 2nd and later | ATTACK | deadbeefcafe0000 | flood overwrites AUSF context with K_aut_ATTACK |
Baseline without flood:
POST /ue-authentications
-> EapID=120, context with K_aut_LEGIT stored
POST /eap-session with AT_MAC(K_aut_LEGIT)
-> AUSF log: Correct RES value, EAP-AKA' auth succeed
-> HTTP 200, EAP success
Race condition run:
POST /ue-authentications
-> EapID=243, context with K_aut_LEGIT stored
20 concurrent POST /ue-authentications requests for the same SUCI
-> 20/20 accepted
-> K_aut_ATTACK overwrites K_aut_LEGIT in UePool
POST /eap-session with AT_MAC(K_aut_LEGIT)
-> AUSF validates against K_aut_ATTACK
-> AUSF log: EAP-AKA' failure: EAP-AKA' integrity check fail
-> HTTP 200, EAP notification failure
Critical AUSF log excerpt:
High Basis: The source's own band: HIGH
0, last affected 1.4.4 (semver)None listed
No fixed version is listed.
Fix commands are the export's own generic commands. Ojuju never runs them. Check them against your setup first.
Check your own computer: guard packages check
Source: GitHub Advisory Database (reviewed advisories) · CC BY 4.0